If you are facing connectivity problems, weak signals and issue while setup and login,In this troubleshoot guide, we will discuss about common problems with your Orbi system.Here,we will provide solutions to get you back online quickly. Let’s start to improve your home WiFi network.
Orbi Mesh System Not Working
There are some reasons and their solution, due to which your Orbi system or Orbilogin Not Working properly. By follow these all tips, you can easily troubleshoot all problems related to your router and the satellite.
Check Cables And Ports
Having good condition of cables and ports is very important for a good connection. First, check all the Ethernet cables and LAN ports carefully. If any port is damage, reconnect cable from it and repair it. Check all the cables, if any cable is disconnect or loose, reconnect it properly. Also ensure the power connection properly given to the router and satellite.
Issue While Setting Up Orbi
If your router and satellite are not setup properly, then you may have to face a lot of problems. To avoid this, you should keep several things in mind. The setup instruction that you see are correct or not, because if you are using wrong or incomplete steps for setup, you cannot setup your Orbi system.
Make sure you complete the syncing process properly. First, press the sync button of router and within 2 minutes press the sync button of the satellite. During syncing process, place the satellite near the router. After syncing, you can move your satellite that place where the signals are weak.
Unable To Orbi Login
You may face many types of problems while logging in.You may face many types of problems while logging in.To login, you have to follow some steps
- Ensure that your device connect with an Orbi network via Ethernet cable or wirelessly.
- If the orbilogin.com or orrbilogin.net not working, try the IP address 192.168.1.1 for login.
- Check router connects to the modem properly or not.
- Clear all the cache memory and the cookies of the browser.
- Use the updated version of the web browser or also login to different browser.
- Update the firmware of your Orbi by using mobile app.
- During login, temporary disable the antivirus software and VPN.
- Use the correct username and password to login.
By following these steps, you can easily perform Orbi login. On the Orbi Stellite, there is different LED light present which indicate different situations of the satellite.
LED Lights
There is different color of LED light on the router and satellite will shows which indicate the different its situation. Below we will understand when these different LED color appear. And what issues do they create:
Orbi Pink Light – When the router show the Orbi Pink LED light, it means the router cannot receive the internet from the modem. But when the satellite show the Pink LED, it unable to get the signals from the router
Blink Red – If your router and satellite blinks the Red LED light, it indicate that your router or satellite Firmware is corrupted.
Magenta– If the satellite shows the Magenta LED light. It mean that your satellite is failed to sync to the router.
Solid Blue – Blue LED light is flash, when your satellite and router sync successfully.
To avoid this:
- Make sure there is not any electronic device and interference between router and satellite
- Check the Ethernet cable between modem and the router is fitted properly
- Ensure the proper power supply given to the all devices
- Update the firmware of the router and satellite
- Do not keep the satellite outside the range of the router
Conclusion
In this article, you learned all the troubleshooting tips that optimize your WiFi signals and provides you fast and reliable network.