What Troubleshooting Tips for Linksys Extender Setup Are?

Linksys extender is a device which helps to eliminate WiFi dead zones. It sync with router and placed halfway of router and the area where network is poor. Linksys extender setup is easy, but there are some problems occur while setting up the extender. Let’s discuss those problems.
Here are some troubleshooting tips you can follow to avoid issues while setting up the Linksys extender:

Verify Power and Placement of Linksys Extender

• Make sure that the Linksys extender is properly plugged in and the power LED is on.
• If it is not powered, try plugging it into another switch.
• Ensure that the extender is placed in such way that lies between your router and the area where network is poor.
• If it is too far from the router, it won’t get a strong enough signal to extend.

Connect Correctly to Your Linksys Extender

• Firstly, go to WiFi setting of your mobile and search for extender’s WiFi network. Connect your mobile to that network.
• Use Ethernet cable, and connect one end with extender and other end with Computer. And you can use the internet now.

Access the Setup Page Properly

• Open a web browser
• Now, type the URL extender.linksys.com in an address bar.
• If the setup page does not load, then try to clear your browser cache.
• Always use the updated web browser.

Ensure Proper Network Settings

• If you’re having trouble accessing the setup page, ensure your device is set to automatically obtain an IP address. Static IP settings can sometimes cause issues.
• Ensure the Linksys extender is compatible with your router’s frequency 2.4GHz or 5GHz, as some older routers may only support one of these frequencies.

Update Linksys Extender Firmware

• Outdated firmware can cause setup and performance problems.
• Access the extender settings and look for any firmware updates that might be available.

Reset the Linksys Extender

• If you are unable to complete the setup, try resetting the extender to factory settings.
• You will see a reset button on your extender.
• Press and hold it for about 10 seconds, to reset Linksys RE6300, LINKSYS RE7000 and many more.
• This will set your extender to Factory settings.
• Now, you have to configure the extender setup again.

Reduce Interference

• To make a smooth path for connectivity, eliminate the interference of obstacles, thick walls and electric appliances. To prevent the network.
• But if you are still facing the connectivity issue, you may need to change the WiFi channel.

Use WPS for Easy Setup

• Check that your router and extender have WPS button or not.
• If yes, then use the WPS button to connect extender with the router.
• To connect, firstly you have to press the WPS button on router, within 2 minutes press the WPS button on extender.
• This will sync your router with extender.

Confirm Wi-Fi Passwords and SSID

• While setting up, make sure you are entering the correct WiFi name (SSID) and password for your home network.
• Incorrect credentials will prevent the extender from connecting properly.

Reboot Router and Linksys Extender

• Sometimes a simple rebooting your device can resolve connection issues.
• To Restart, unplug the switches of router and extender. Now wait for few minutes, and then plugin back the router and extender.

Update Security Settings

• Ensure that the extender is suitable with your router security.
• If the router having a security protocol which is not supported by the extender, then it will not connect the router with the extender.

Check for Signal Strength

• CheckLED light on the extender, it can indicate the quality of the signal receiving from the router.
• If it shows a poor signal then try moving your extender closer to router.

Just by following these troubleshooting tips, you can resolve the issues faced while setting up the Linksys extender.

Conclusion

In short, Linksys extender is easy to setup and if you stuck at any point, you can follow these troubleshooting tips to clear your way.