The Eero mesh system can bring your internet speed at its best; just connect it to your WiFi network easily. Use the Ethernet cable and connect it to the Eero Ethernet port and router LAN port. Turn on the system by powering them electricity, and you are ready to run interface.
How to Update Eero Mesh Firmware?
You can update the Eero mesh firmware update with the help of your phone as well as your computer/laptop. Have a look how to update after Eero 6 Extender setup.
Access Interface From App
1. You can update the mesh system with the help of phone.
2. Just download the Eero app from the Play Store if you are using Smartphone.
3. Download the app from the App Store if you are using iPhone.
4. If you don’t have any Eero account, then you can easily create one using Email ID and creating password.
Eero Update Firmware
Once you have access the Eero app, you must select the Menu option> Update tab. Here, you have to just tap on the UPDATE button.
Access Interface From Computer
1. Go in to the browser (which should be updated), type in the IP address 192.168.1.1 or 192.168.4.1.
2. Search the IP by pressing the Enter button and you will reach to the login page of booster.
3. Here, you have to enter the username and password, which are admin in both the fields.
You will get to the interface page.
Update Firmware
On the interface, you have to select the Settings and find the section named Firmware. On the firmware tab, just search the newest firmware file, which you can download and install in the Eero mesh and reboot it.
Let’s see and learn why networking devices need an update at regular interface;
Why You Need to Update Eero?
Basically, firmware update makes your device run smooth and works faster. It also dispels all the errors and bugs that your device is facing at present. The firmware update process is so simple to perform as you can read above. Only networking devices don’t have firmware software installed in them, you can also find the firmware in Smart TVs, and devices that can connect with WiFi network.
So update your device if you are facing any technical issue related to the setup.
Here are more tips that you can use to troubleshoot any error related to the Eero mesh system setup and hardware.
Troubleshoot Any Problem
These are the major tips and fixes that can solve any problem easily.
Check Cables
You should make sure that the Ethernet cable or power cord is in good conditions, if it is not then replace and connect other one.
Restart
There are two methods to the restart the Device, have a look at them one by one:
1. Unplug the connected power adapter to the power socket and plug it again to turn it on.
2. Find the power button and press it twice and restart it.
You should also reboot the WiFi by refreshing its network, by turning it off and turning it on.
Reset
You will see the RESET button on the device at the side of the ports, it is a pinhole button. Use any sharp object like pen or pin to press and hold it.
But after resetting the device, you must re-configure the device, which you can do by above given instructions that you can also run to complete the setup take help from how to set up Eero extender.
The end Lines
Here, you have seen and learned how to update the Eero mesh extender and why it is needed. we have also added troubleshooting tips and solutions.
